Decoder DC07 (Static 3,6 V)

This decoder is designed to equip a static vehicle with lighting functions and up to 2 servos. It has no voltage converter nor infrared amplifier. The control of the functions can be done through an LCIR system or through a DCC central with a resistance of 150 KΩ at the IR input.

It can be installed in immobile vehicles, or vehicles with movement such as airplanes, helicopters, ships...

Short and long digital address (1-127 / 128-9999) factory default: Address 1.

For vehicles with batteries from 3.6 to 5 V (This decoder does not have a voltage converter).

Decoder ready to work: Factory pre-programmed CVs with the most common values.

Possibility of control from 8 meters away by LCIR of 455 kHz.

Automatic light function (day/night) by means of a luminosity sensor.

It can control up to 2 servos.

Most outputs include an internal resistance, so LEDs can be connected directly. Some outputs require an external resistance to connect the LEDs.

Up to 16 outputs (5 of them multi-function MF):

- Light 0 Front position
- Rear position light
- Extra brake light that is activated when slowing or stopping. Adjustable time (CV 63). The output can be connected to the rear position light or to an extra red light
- Left direction blinker (or fixed, through CV 30)
- Right direction blinker (or fixed, by CV 31)
- 5 programmable emergency lights: fixed or various types of flashes (3 of the outputs require resistance)
- Light 2
- Output MF1: Light 4 or servo
- Output MF2: Light 3 or servo
- MF3 output: Light 5 (Requires resistance) or lighting sensor for day/night control
- MF4 output: Hall sensor or light 6 (Requires resistance) (CV 25)
- Output MF5: XT Infrared Emitter or light 7 (Requires resistance) (CV 25)

Functions:
F0: Front light + Rear light
F1: Blinker Left (steady light if CV30 = 0)
F2: Blinker Right (steady light if CV31 = 0)
(F1 + F2 = Emergency flashers)
F3: Ignore front anti-collision
F4: Ignore reed switch
F5: Emergency lights "Flash 1+2+3+4" (They can also be fixed lights)
F6: Front flash "Flash 0" (steady light if CV38 = 255)
F7: Light 2
F8: Light 3 + Light 4 (factory value CV 20 Bit 4 = 0) / F8: Light 3 (if CV 20 Bit 4 = 1)
F9: Light 4 (only if CV 20 Bit 4 = 1)
F10: Light 5 (only if CV 27 Bit 3 = 1)
F11: Light 6 (only if CV25 Bit 5 = 1)
F12: Light 7
F13: Deactivate rear anti-collision

List of CVs in English (December 2014)

List of CV's in German (February 2017)